Jeep Wrangler

Keep your Jeep moving forward and overcoming obstacle with new oil. Over time, dirty oil can create clogs and decrease the efficiency of your engine. Follow these easy steps to drain and replace the oil in your Jeep Wrangler. Use a free VIN lookup online to be sure you have the right oil and filter before you get started.

Gather the Necessary Tools and Equipment

There are a few essentials you’ll need before you get started. It’s important for you to gather these before you get started, or you may drain your oil before you’re ready to replace it. These tools and equipment can help you safely and efficiently change your oil:

  • Gloves and work clothes
  • The exact oil weight described in your owner’s manual
  • Oil filter
  • Oil drain pan
  • Funnel
  • Adjustable wrench
  • Oil filter wrench

Get the best prices on synthetic oil and oil filters to save money on your oil change. While many auto shops offer affordable oil changes, changing your own oil gives you a chance to carefully inspect your Jeep and ensure that you have the proper oil and oil change procedures.

Prepare Your Jeep

Park your Jeep on a flat, dry area. Be sure it’s in park and has had at least 30 minutes to completely cool down.

Drain the Oil

Open the hood of your Jeep Wrangler and locate the oil cap. Make sure all parts are cool before removing the cap. Next, place your oil pan underneath the oil reservoir under your Jeep. The oil reservoir has an oil drain plug, which is a small nut that seals the drain of your oil reservoir. Here is where all your old, dirty oil will completely drain into the oil drain pan.

Take care when removing the oil drain plug. Hot oil can be particularly dangerous, but even cold oil can be dangerous if it gets in your eyes. Once it’s fully removed, wait until the oil completely drains from your oil reservoir. Put the drain plug back in place and be sure it’s sufficiently tightened to form a seal.

Replace the Oil Filter

Your Jeep Wrangler uses an oil filter to extend the lifetime of your oil by filtering out contaminants. Change your oil filter every time you change your oil. Otherwise, a dirty oil filter will quickly contaminate your brand-new oil.

Removing the oil filter will cause more oil to spill out, so be sure you move the oil drain pan under your oil filter. Some oil filters can be removed by hand, but you may need to use an oil filter wrench. You can typically access the oil filter from the top-side of the engine, but you may need to access it from underneath your Jeep.

Refill the Oil Reservoir

Replace your oil filter and fill up your oil reservoir. Double-check the exact oil weight and amount of oil that your reservoir contains. Check that the oil level is within the appropriate levels.

Enjoy Restored Lubrication and Long-Lasting Performance

For more information on the exact oil weight and tips on how often to change oil, go to a trusted auto store website or store location near you. Ask a professional about any concerns you may have about the oil change process or other maintenance tips for your Jeep Wrangler.

LEAVE A REPLY

Please enter your comment!
Please enter your name here